www.lcdinverter.co.uk part of the www.sparesweb.com group Acquired by G Bentley ltd. tel : 0121 772 5000 9.30am - 8pm mon-friday 9-5 Saturday NEW trade counter
|
www.lcdinverter.co.uk part of the www.sparesweb.com group Acquired by G Bentley ltd. tel : 0121 772 5000 9.30am - 8pm mon-friday 9-5 Saturday NEW trade counter |
|
We ship worldwide
Remember to use our shopping cart you need to be in English so to order you cannot use Babel fish To order just click on the translated page please view this in the original language
fixed price no fix no fee laptop repair at this link only £129+vat click here to go to the repair page and you can book it in online
Need help in dismantling your system?
Laptop Schematics and disassembly guides are available at this link
|
This one is supplied with wires at this price pos neg and on/off If you want it without the wires you can get it here 11205a23v.02, mh-11205a23v.02, our own special simple 12v inverter with wires , this is suitable for use in any laptop or any system with a 12v and ground line, laptop, notebook, inverter, lcdinverter I have spent a couple of years working out this solution, you can always find a 12v and ground in a laptop, (most inverters first pin is 12v and last is ground but not always) it is always on, so will light up the bulb the second you power up the laptop, you dont have to worry about finding the start-up pin as it is always on, the brightness control pin is also bypassed we have a little trimmer on the board for this purpose, so you set the brightness after installation, and then it is set REMEMBER, SOME VOLTAGE POINTS ON A LAPTOP MAY READ 12V ON BATTERY AND CHANGE TO 14-19V WHEN ON MAINS, SO MAKE SURE YOU DONT USE ONE OF THOSE POWER POINTS This can be used in any laptop with 12-15.4" lcd's full details are at the bottom, ideal if you have a system that either the inverter is unavailable for, or is expensive or on a long lead time also ideal for repair shops who want a budget option which will allow them to repair any system in 15 mins, (or systems with board problems where the original inverter isnt getting a signal from the board) can also be operated from a straightforward 12v dc power supply for test rigs and other things such as desktop lcd's if you can only find a higher voltage put the following diodes in online
Special internet pricing,
Stock level Additional stock 3-14 working days If this item is showing out of stock, we will be able to supply in a few days, (or it may be in stock just not on our stock system yet) please use this button to email for a shopping link and and shipping time.
env052
an original and the solution using this inverter
After the wires are soldered flatten the ends with a set of pliers
Then pus hin the relevant parts on the original connector this is a good firm way to install you only need the pos, neg and activation signal which is labelled
All up and running like the orignal but no hassle and you can do it today |
NOTE: new tel numbers and address
G Bentley ltd
Our new offices and trade counter click for big pic
Join our mailing list using the form below, to receive details of our new products, and special members discounts
|
|
G bentley ltd Send mail to
info@gbentley.co.uk with questions or
comments about this web site.
|
See the bottom
for an example of installation, Note you only need the positive and negative,
and the activation Positive and negative are 12-19v the activation signal (on
off, can be between 3-5v, the original is normally 3v)
